Search found 10 matches

by swerve13drums
Tue Sep 02, 2008 5:57 pm
Forum: MULTIQUENCE (discontinued)
Topic: recording several inputs at once
Replies: 14
Views: 19958

Re: recording several inputs at once

I have no idea why I waited over 2 years to post a response to this - but the M-Audio Delta 1010lt works with multiquence/Goldwave/windowsXP EXACTLY as OKCBoy explained above. Now, I use two 1010lt cards to run 8 simultaneous inputs on 8 separate tracks in multiquence, typically capturing a full ban...
by swerve13drums
Wed Mar 21, 2007 11:28 pm
Forum: GoldWave General
Topic: help!
Replies: 4
Views: 2180

try using a splitter to send the mic signal to both channel 1 and channel 2. Radio shack will have a splitter for about 5 bucks. Set your gains and inputs and whatever other controls are on the interface at the same level. or, after you've recorded your mono sound, go to effect/stereo/channel mixer ...
by swerve13drums
Mon Mar 19, 2007 7:54 pm
Forum: MULTIQUENCE (discontinued)
Topic: Multiquence accessibility
Replies: 5
Views: 9444

after your audio is loaded onto track 1, add a second blank track (right click/"new track"). then place the marker on one end of your 5 second audio clip, and hit ctrl-L to split out this piece of audio. Repeat this ctrl-L on the other side of your audio clip. now you can right click on this trimmed...
by swerve13drums
Tue Nov 21, 2006 4:56 pm
Forum: MULTIQUENCE (discontinued)
Topic: Help! audio plug-ins that work with multiquence
Replies: 3
Views: 5640

OKCBoy -

you've just changed my life.
the AnwidaSoft DX-Reverb Lite is pretty much exactly what I was looking for.

do you have an opinion about any of the other AnwidaSoft plug-ins, or are you aware of any other company's plug-ins that are compatable with mulitquence?

thanks so much.
by swerve13drums
Mon Nov 20, 2006 7:58 pm
Forum: MULTIQUENCE (discontinued)
Topic: Help! audio plug-ins that work with multiquence
Replies: 3
Views: 5640

Help! audio plug-ins that work with multiquence

I don't know what I'm not understanding about audio plug-ins that are compatible with multiquence. Is there a brand of plug-in that is particularly compatible? I'm looking for a good reverb plug-in, and I'll take advice on any others that measure up to the quaility of goldwave effects. But - if you ...
by swerve13drums
Tue Sep 05, 2006 7:21 pm
Forum: MULTIQUENCE (discontinued)
Topic: Timeline is off
Replies: 2
Views: 4828

-

this really isn't any different than what the adminstrator just said, but I've encountered this exact same problem when running sequences that include both WAVs and MP3s. I imagined that the compressed files just weren't preciesly compatable with uncompressed files. When played together from the beg...
by swerve13drums
Thu Jun 22, 2006 5:26 pm
Forum: MULTIQUENCE (discontinued)
Topic: USB interface?
Replies: 2
Views: 5606

USB interface?

is anybody using a USB audio interface with mulitquence?

is it detected and selected just like a soundcard input?
by swerve13drums
Tue Jun 20, 2006 7:53 pm
Forum: MULTIQUENCE (discontinued)
Topic: recording several inputs at once
Replies: 14
Views: 19958

Re: recording several inputs at once

[quote="GoldWave Inc."]I don't think the MAudio Delta 1010LT will be recognized as separate recording devices by Multiquence, so you'll have only one stereo recording device per card. Chris[/quote] I would suspect you have a pretty good handle on these questions! I'll consider this the final word on...
by swerve13drums
Mon Jun 19, 2006 3:25 pm
Forum: MULTIQUENCE (discontinued)
Topic: recording several inputs at once
Replies: 14
Views: 19958

at the risk of sounding redundant - and I've got to be as sure as I can be before I invest any $$ - we're talking about selecting inputs *via the DEVICE button on the sound recorder window* in mulitiquence, right? I'd hate to buy the card, install it, and have multiquence acknowledge all of it's inp...
by swerve13drums
Sat Jun 17, 2006 11:48 am
Forum: MULTIQUENCE (discontinued)
Topic: recording several inputs at once
Replies: 14
Views: 19958

recording several inputs at once

If I was using mulitquence with a PCI card like an MAudio Delta 1010LT, would I be able to select between mulitple "ins" on the card via the DEVICE button on the sound recorder window?

or would I be limited to just selecting among my available cards, one recording section per available soundcard?