I have a usb creative sound blaster audigy 2, 24 bit. When I do syncro recording with multiquence the syncro "runs out" very quickly.
Can I change the latency or time of ether multiquence or the sound card.
?? $150 later.
audigy 2 nx out of sync
-
- Posts: 17
- Joined: Tue Dec 28, 2004 3:24 am
- Location: winlaw bc canada
-
- Site Admin
- Posts: 4372
- Joined: Wed Mar 10, 2004 6:43 pm
- Location: St. John's, NL
- Contact:
Re: audigy 2 nx out of sync
To get good synchronization, everything would have to be recorded and played through the same sound card or device. If one file was copied from a CD, a second file was recorded through a built-in sound card, and a third file was recorded through a USB device, all the files would have slightly different timings.
If you are playing the project through one sound device and recording a synchronized track through a different sound device, then there is no way to ensure they'll be synchronized. After recording, you can convert the recording section to a playback section and use the Speed effect to make a small adjustment to compensate for the difference.
Chris
If you are playing the project through one sound device and recording a synchronized track through a different sound device, then there is no way to ensure they'll be synchronized. After recording, you can convert the recording section to a playback section and use the Speed effect to make a small adjustment to compensate for the difference.
Chris