is there a shortcut to hide/unhide the control window?

GoldWave general discussions and community help
Post Reply
Sara
Posts: 102
Joined: Tue May 16, 2017 6:40 am

is there a shortcut to hide/unhide the control window?

Post by Sara »

Hi
sometime could be very useful hide/unhide the control window

is there a shortcut to do it ? to hide/unhide

i gave a look at option->keyboard or the guide without luck

thanks
Goldwave lover

Tristan
Posts: 392
Joined: Mon Jun 01, 2009 8:20 pm
Location: Southeast Michigan

Re: is there a shortcut to hide/unhide the control window?

Post by Tristan »

I looked and I didn't find a shortcut.
I don't want to read the manual either, but it isn't my problem, is it?

GoldWave Inc.
Site Admin
Posts: 4019
Joined: Wed Mar 10, 2004 6:43 pm
Location: St. John's, NL
Contact:

Re: is there a shortcut to hide/unhide the control window?

Post by GoldWave Inc. »

You'll need to use Options | Keyboard to assign a key to the "ToolControl" function.

Sara
Posts: 102
Joined: Tue May 16, 2017 6:40 am

Re: is there a shortcut to hide/unhide the control window?

Post by Sara »

GoldWave Inc. wrote:You'll need to use Options | Keyboard to assign a key to the "ToolControl" function.
hi
but it doesn't hide/unhide the control window
i added Alt+u ,but it changes the layout and it doesn't hide the control window
thanks
Goldwave lover

JackA
Posts: 154
Joined: Thu May 24, 2012 5:52 pm

Re: is there a shortcut to hide/unhide the control window?

Post by JackA »

I just minimize the Control when it's in the way.

GoldWave Inc.
Site Admin
Posts: 4019
Joined: Wed Mar 10, 2004 6:43 pm
Location: St. John's, NL
Contact:

Re: is there a shortcut to hide/unhide the control window?

Post by GoldWave Inc. »

Setting the "ToolControl" function to Alt+U on my system hides(docks)/shows the Control window in exactly the same way that the Tool | Control menu command does. If you want to controls completely hidden even from the tool bar, try using the Options | Toolbar and select the Control tab to uncheck all the items.

Sara
Posts: 102
Joined: Tue May 16, 2017 6:40 am

Re: is there a shortcut to hide/unhide the control window?

Post by Sara »

GoldWave Inc. wrote:Setting the "ToolControl" function to Alt+U on my system hides(docks)/shows the Control window in exactly the same way that the Tool | Control menu command does. If you want to controls completely hidden even from the tool bar, try using the Options | Toolbar and select the Control tab to uncheck all the items.
hi
yes it works Options
| Toolbar[/b] and select the Control tab to uncheck all the items.
thanks
Goldwave lover

Post Reply