Hi, I got a question, if it is possible, can you reset the clip on the Analog Meter if the meter peaks out? I know you can do this with the VU meter under properties. I would to be able to do this because the only way to reset the peak hold (in the red zone) is by starting over. I only ask because I use the analog meter quite frequently while editing.
If this is not available to do currently, do you think you could make the option (maybe for the next patch) to include the abilty to change the peak hold time and reset the clip (as you can for the VU meter). If so, I would really appreciate it. Thanks.
Sarge
Reset Clip & Set Peak Hold Time VU Meter
Reset Clip & Set Peak Hold Time VU Meter
Last edited by Sarge on Fri Oct 07, 2005 9:13 pm, edited 3 times in total.
-
- Site Admin
- Posts: 4375
- Joined: Wed Mar 10, 2004 6:43 pm
- Location: St. John's, NL
- Contact:
Re: "Reset Clip" and set "Peak Hold Time"
There is no way to reset the analog peak indicator right now (other than stopping and re-starting playback or recording). The same settings used under the VU meter will be available for the analog meter at some point in the future.
Chris
Chris
-
- Site Admin
- Posts: 4375
- Joined: Wed Mar 10, 2004 6:43 pm
- Location: St. John's, NL
- Contact: