Assign audio tracks to specific channels on a 5.1 card

VideoMeld discussions and community help
Post Reply
richj
Posts: 2
Joined: Sat Nov 01, 2014 3:07 pm

Assign audio tracks to specific channels on a 5.1 card

Post by richj »

I want to use a 5.1 audio card with VideoMeld to output two pairs of stereo tracks. Is it possible to assign individual tracks to a given output on a 5.1 card?
GoldWave Inc.
Site Admin
Posts: 4372
Joined: Wed Mar 10, 2004 6:43 pm
Location: St. John's, NL
Contact:

Re: Assign audio tracks to specific channels on a 5.1 card

Post by GoldWave Inc. »

You can use Options | Section Settings to have some control over the channel mapping. It doesn't support a fully custom map yet. That is planned for a future update. You could open the project file in Notepad and search for "ChannelMap", then adjust the values by hand. Be sure to set the correct project audio channels under Options | Project.

Chris
Post Reply