CD section empty?

General discussions and questions about MULTIQUENCE
Post Reply
cap
Posts: 1
Joined: Fri Aug 27, 2004 4:57 am

CD section empty?

Post by cap »

Hi all, when I add a CD section and load in a cd track, it won't play. What's wrong?

thanks in advance,

grtz,

CAP
Amsterdam
GoldWave Inc.
Site Admin
Posts: 4372
Joined: Wed Mar 10, 2004 6:43 pm
Location: St. John's, NL
Contact:

Re: CD section empty?

Post by GoldWave Inc. »

CD audio in Multiquence is played through the analog output on the CD drive. If there is no cable connecting the CD drive audio output to the sound card, or the CD volume is muted under the Windows Volume Control accessory, you will not be able to hear the audio. Programs like Windows Media Player play the CD digitally, so an analog connection is not required.

It is recommended to copy the audio from the CD to a Wave file first (or use Media Player to copy the track to a WMA file without copy protection), then add that file in Multiquence instead.

Chris
Post Reply