cut and paste frames

General discussions and questions about MULTIQUENCE
Post Reply
dooma
Posts: 3
Joined: Thu Jul 28, 2005 11:37 pm

cut and paste frames

Post by dooma »

I have a 5 4 minute vedio clips. I want to cut and past certain frames from each clip since I do not want all the 5 clips in one vedio clip. Can I do that?

I have a one hour vedio clip on DVD CD. Can I cut certain ssegments from it and put these segments together in a seperate vedio?
P.V.D
Posts: 1
Joined: Mon Aug 01, 2005 1:27 pm

Post by P.V.D »

yoh
dooma
Posts: 3
Joined: Thu Jul 28, 2005 11:37 pm

Post by dooma »

Can you direct me to the steps I need to take to cut and past
OKCBoy
Posts: 110
Joined: Thu Jun 30, 2005 6:42 pm
Location: Oklahoma, USA

Post by OKCBoy »

dooma wrote:Can you direct me to the steps I need to take to cut and paste
Well, I've only used Multiquence for audio purposes, but since no one has replied yet, and since I believe it allows for similar handling of audio and video sections, let me take a stab at it:

:arrow: Create a track.
:arrow: Insert first video as a video section.
:arrow: Trim the start and end of the section, leaving only the scene you want to keep.
:arrow: Add next video as a video section right after the first one.
:arrow: Repeat from step 3.

I hope that helps. Good luck.
Post Reply