0xc000142 error

Discussions for GoldWave plug-in development
Post Reply
VinceZhou
Posts: 7
Joined: Wed May 02, 2007 11:00 pm

0xc000142 error

Post by VinceZhou »

Hi,
Thanks for the response.

I am using GoldWave 5.18 and experiencing some odd exception:
I built a small ASP.NET application to invoke a GoldWave process for batch process. It runs fine on one Windows XP machine but fails on another XP machine.

I got the following error message:

GoldWave.exe - Application Error
The application failed to initialize properly (0xc000042). Click on OK to terminate the application.

Any help will be greatly appreciated.

Vince
Kummel
Posts: 141
Joined: Sat Sep 23, 2006 7:10 pm

Post by Kummel »

Not sure it's the same cause, but I had this warning message from Windows in another application during a heat period, and it disapeared when the temperatures were back to normal.
:D
VinceZhou
Posts: 7
Joined: Wed May 02, 2007 11:00 pm

I bet this has to do with ASP.NET

Post by VinceZhou »

Are you using ASP.NET?
If so I believe it has to do with ASP.NET's limitation.
GoldWave Inc.
Site Admin
Posts: 4372
Joined: Wed Mar 10, 2004 6:43 pm
Location: St. John's, NL
Contact:

Re: I bet this has to do with ASP.NET

Post by GoldWave Inc. »

Make sure that all the latest updates for XP and ASP.NET are installed on both computers. Also use the Windows Task Manager to see what programs are running on each computer and use "Add or Remove Programs" under the Control Panel to see what software is installed. That might give some insight into the difference.

Chris
Post Reply