Send current spectrum to shape in Noise Reduction

Discussions for GoldWave plug-in development
Post Reply
Jedinhopy
Posts: 11
Joined: Thu Jan 27, 2011 11:53 am

Send current spectrum to shape in Noise Reduction

Post by Jedinhopy »

1. Open a wavefile
2. Use Noise Reduction
3. Select (Use current spectrum) as (Reduction envelope)
4. Press the (send current spectrum to (Use shape) in (Reduction envelope)) button
5. Now, save the spectrum in (Use shape) in (Reduction envelope) as a new preset
6. Then use it on another soundfile later.
GoldWave Inc.
Site Admin
Posts: 4372
Joined: Wed Mar 10, 2004 6:43 pm
Location: St. John's, NL
Contact:

Re: Send current spectrum to shape in Noise Reduction

Post by GoldWave Inc. »

That can be done with the "Use clipboard" Noise Reduction envelope option. You'd just need to select and copy the noise first by using Edit | Copy (before displaying the Noise Reduction window). You can use Edit | Copy To to save the noise to a file to use it later. However using noise from one file to process another usually does not give the best results.

Chris
Post Reply